প্রযুক্তি পণ্যের বাজার অস্থিতিশীল হওয়ার কারণে যেকোন সময় মূল্য পরিবর্তন হতে পারে। তাই  , অর্ডার করার পূর্বে কাস্টমার কেয়ার থেকে পন্যের মূল্য , স্টক ও ডেলিভারি সম্পর্কে জানতে এই নাম্বারে ফোন করুন = 01894-683430

10G uplink 28-port L3 managed industrial PoE switch

Features of the ONV-IPS58028PFM 10G uplink 28-port L3 managed industrial PoE switch

(Call for Price +88 018-94683430)

  • Model: ONV-IPS58028PFM | ONV-IPS58028PFM-at
  • Ports: 24× Gigabit PoE + 4× 10G SFP+
  • PoE: IEEE 802.3af/at, up to 30W per port
  • Layer 3: IPv4/IPv6, dynamic/static routing, ACL/QoS
  • Design: Fanless aluminum housing, dual AC/DC power, rack mountable

Description

Specification of the 10G uplink 28-port L3 managed industrial PoE switch

Model ONV-IPS58028PFM
ONV-IPS58028PFM-at
Interface Characteristics
Fixed Port 2*AC100-240V input ports
Power failure alarm switch port (FAULT)
1*Console RS232 port (115200, N, 8,1)
4*1/10G uplink SFP+ fiber ports (Data)
24*10/100/1000Base-T PoE ports (Data/ Power)
2*DC48-57V input ports (support reverse polarity protection)
Ethernet Port Port 1-24 can support 10/100/1000Base-T(X) auto-sensing, full/ half duplex MDI/ MDI-X self-adaption
Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP (≤100 meters)
100BASE-TX: Cat5 or later UTP (≤100 meters)
1000BASE-T: Cat5e/6 or later UTP (≤100 meters)
Optical Fiber Port 1/10G SFP+ optical fiber port, default no include optical module (optional single-mode/ multi-mode, single fiber/ dual fiber optical module. LC)
Optical Fiber Port Expansion Turbo overclocking 2.5G optical module expansion and ring network
Optical Cable/ Distance Multi-mode: 850nm/ 0-550m, 850nm/ 0-300m(10G), Single-mode: 1310nm/ 0-40km, 1550nm/ 0-120km.
Chip Parameter
Network Management Type L3
Network Protocol IEEE 802.3 10BASE-T, IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-X, IEEE 802.3ae 10GBase-LR/SR, IEEE 802.3x
Forwarding Mode Store and Forward (Full wire speed)
Switching Capacity 128Gbps (non-blocking)
Forwarding Rate@64byte 95.23Mpps
CPU 800M
DRAM 1G
FLASH 128M
MAC 16K
Buffer Memory 12M
Jumbo Frame 12K
LED Indicator Power: PWR(Yellow), System: SYS (Yellow), Network: Link (Yellow), PoE: PoE (Green), Fiber port: L/A (Green)
Reset Switch Yes, press and hold the switch for 10 seconds and release it to restore the factory settings
PoE& Power Supply
PoE Port Port 1-24
PoE Management PoE working status display, Port PoE on/off, af/at power distribution
Power Supply Pin 1/2 (+) 3/6(-)
Max Power Per Port 30W, IEEE 802.3 af/at
Total PWR/ Input Voltage 2*400W/ (AC100-240V)
2*600W /(AC100-240V)
Power Consumption Standby<20W, full Load<380W
Standby<22W, full Load<600W
Power Supply Built-in power supply, AC100~240V 50-60Hz, 5.0A
Built-in power supply, AC100~240V 50-60Hz, 6.6A
Power Input Port Alarm switch port, 2*AC power input ports, 2*DC48-57V input ports
Dual input power port design: AC power supply priority to support anti-reverse connection protection, and automatically switches to DC connection when power fails.
Physical Parameter
Operation Temp/ Humidity -40°C~+75°C, 5%~90% RH non condensing
Storage Temp/ Humidity -40°C~+85°C, 5%~95% RH non condensing
Dimension (L*W*H) 440*378*44.5mm
Net /Gross Weight 5.4kg/ 6.2kg 6.2kg/ 7.0kg
Installation Desktop, 1U/19” cabinet
Certification& Warranty
Lightning Protection IEC61000-4-3 (RS): 10V/m (80-1000MHz)
FCC Part 15/CISPR22 (EN55022): Class A
IEC61000-6-2 (Common Industrial Standard)
IEC61000-4-9 (Pulsed magnet field): 1000A/m
IEC61000-4-10 (Damped oscillation): 30A/m 1MHz
IEC61000-4-12/18 (Shockwave): CM2.5kV, DM1kV
Protection level: IP30, Lightning protection: 6KV 8/20us
IEC61000-4-4(EFT): Power cable: ±4kV, data cable: ±2kV
IEC61000-4-16 (Common-mode transmission): 30V, 300V, 1s
IEC61000-4-2 (ESD): ±8kV contact discharge, ±15kV air discharge
IEC61000-4-6 (Radio frequency transmission): 10V(150kHz~80MHz)
IEC61000-4-8 (Power frequency magnetic field): 100A/m, 1000A/m, 1s-3s
IEC61000-4-5 (Surge): Power cable: CM±4kV/ DM±2kV, data cable: ±4kV
Mechanical Properties IEC60068-2-6 (Anti Vibration), IEC60068-2-27 (Anti Shock), IEC60068-2-32 (Free Fall)
Certification CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class A, RoHS
Warranty 5 years, lifelong maintenance.
Network Management Feature
Interface Port real-time flow management (Flow Interval)
Broadcast storm suppression based on port rate
Optical port SFP module DDMI real-time digital diagnosis
Port EEE Green Ethernet Energy-Saving configuration and status view
IEEE 802.3x flow control (Full duplex), Port exception protection mechanism
Limit the rate of incoming and outgoing packet traffic, mini granularity is16Kbps and max is 1Gbps
L3 Feature IPV4/ IPV6 VRRP, max is 255 group
IPV4/ IPV6 VLANIF port, max128 entries
Pingv6, Telnetv6, TFTPv6, DNSv6, ICMPv6
IPV4/ IPV6 static route/ default route, max128 entries
IPV4 dynamic routing, RIPv1/v2, OSPFv2, routing 4000 entries
NG protocol, max 1000 entries, ARP protocol, max 1000 entries
L3 network management function, IPV4/ IPV6 dual-stack management
IPV6 dynamic routing OSPFv3, RIPng, IPV6 management, routing 1000 entries
L3 routing and forwarding, support communication between different network segments and different VLAN
VLAN VLAN based on MAC, VLAN based on the protocol
GVRP VLAN protocol, Port configuration of Access, Trunk, Hybrid
(4K) VLAN based on port, IEEE 802.1q, Voice VLAN, QinQ configuration
Port Aggregation LACP dynamic aggregation, Static aggregation, Max 14 aggregation groups and max 8 ports per group.
Spanning Tree STP BPDU Guard, BPDU filtering and BPDU forwarding
STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
ERPS Ring Network ERPS, Recovery time less than 20ms, ITU-T G.8032
Multicast MLD Snooping, Multicast VLAN
User quick log out, MVR (Multicast VLAN Registration)
IGMP Snooping v1/v2/v3 and 1024 multicast groups at most
Mirroring Bidirectional traffic mirroring for basic ports
Supports 1-to-multiple mirroring, supports up to 4 port sessions
QoS Flow-based rate limiting, Flow-based redirection
Queue scheduling algorithm (SP, WRR, SP+WRR)
Flow-based packet filtering, 8*Output queues of each port
802.1p/ DSCP priority mapping, Diff-Serv QoS, Priority mark/ remark
ACL ACL distribution based on port and VLAN
L2-L4 packet filtering function, matching the first 80 bytes message, and provides ACL definitions based on source MAC address, destination MAC address, source IP address, destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, VLAN, etc.
Security Port based IEEE802.1X authentication
SSL guarantees data transmission security
Quad binding function of IP+MAC+VLAN+ports
MAC address learning limit, MAC address black hole
IP Source Guard function, AAA& RADIUS certification
Anti DoS attack, Port broadcast message suppression
Hierarchical user management and password protection
SSH 2.0 provides a secure encrypted channel for user login
Host data backup mechanism, ARP intrusion detection function
Port isolation, IP source address protection, ARP message speed limit function
DHCP DHCP Client, DHCP Snooping, DHCP Server
Management NTP clock, Viewing CPU Instant Utilization Status
FTP, TFTP file upload and download management
One-click restore, Web network management (https)
Cable status check, Ping detection, System work log
SNMP V1/V2/V3, Link Layer Discovery Protocol(LLDP)
ONV-NMS platform cluster management (LLDP+SNMP)
Console/ Telnet/ CLI/ SSH command line configuration
System Web browser: Mozilla Firefox 2.5 or higher, Google Chrome V42 or higher, Cat5 and above Ethernet cable
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, Mac OS X) installed on each computer in the network Cat5 and above Ethernet cable

10G uplink 28-port L3 managed industrial PoE switch

10G uplink 28-port L3 managed industrial PoE switch

The ONV-IPS58028PFM 10G uplink 28-port L3 managed industrial PoE switch is a powerful and feature-rich 28-port L3 managed industrial PoE switch with 10G uplink that was created to satisfy the needs of high-performance networking in industrial settings. Here is a detailed examination of its features and capabilities:

 

High-Performance Ports:

 

With 24 x 10/100/1000Base-T Ethernet ports that support PoE (Power over Ethernet), this industrial switch is perfect for connecting and powering devices like VoIP phones, IP cameras, and access points. It also has four 1/10G SFP+ ports for high-speed uplink connections, which guarantee dependable and quick data transfer between network segments.

 

PoE Power and Budget:

 

Each PoE port that supports IEEE 802.3af/at standards has a maximum delivery capacity of 30W, which is enough power for the devices that are attached. With a 400W total PoE power budget, the switch provides flexibility for large installations that need to use the same Ethernet cables for both data and power supply.

 

Layer 3 Routing Capabilities:

 

With capabilities including IP routing, ARP, and static routing, this switch is excellent at Layer 3 routing and can effectively handle IP traffic flowing across many networks. Additionally, it facilitates IPv4/IPv6 routing, giving contemporary network architectures scalability.

 

Comprehensive Security and Management:

 

The ONV-IPS58028PFM provides a number of security capabilities for networks, such as 802.1X authentication, ARP inspection, and IP-MAC-VLAN-Port binding. To make sure that only authorized devices may connect to the network, you can also use DHCP snooping and access control lists (ACLs).

 

Management Flexibility:

 

This switch makes network monitoring and configuration simple with its many management choices, which include SNMP v1/v2c/v3, a web-based interface, and a Command Line Interface (CLI). Additionally, the device supports ONV NMS, SSH 2.0, and HTTPS for remote management.

 

 

 

Overall, the ONV-IPS58028PFM 10G uplink 28-port L3 managed industrial PoE switch is a superb networking solution for industrial applications that need power over Ethernet features in addition to high-performance data transmission. It is a great option for creating dependable and effective industrial networks because of its many capabilities, strong security, and scalability.

 

What is the price of the 10G uplink 28-port L3 managed industrial PoE switch in Bangladesh?

The latest price of the ONV-IPS58028PFM-at is (Call for Price +88 018-94683430). You can buy the ONV-IPS58028PFM from us at the best price. You can either purchase it through our website or directly visit our office.

Our Office Address: 51, Kazi Villa, 3rd Floor, Suvastu Arcade ICT Bhaban Goli, New Elephant Road, Dhaka-1205, Bangladesh.

Contact Us: +88 01894-683430

Reviews

There are no reviews yet.

Be the first to review “10G uplink 28-port L3 managed industrial PoE switch”