প্রযুক্তি পণ্যের বাজার অস্থিতিশীল হওয়ার কারণে যেকোন সময় মূল্য পরিবর্তন হতে পারে। তাই  , অর্ডার করার পূর্বে কাস্টমার কেয়ার থেকে পন্যের মূল্য , স্টক ও ডেলিভারি সম্পর্কে জানতে এই নাম্বারে ফোন করুন = 01894-683430
uplink 36-port L2+ managed industrial PoE switch
uplink 36-port L2+ managed industrial PoE switch

10G uplink 36-port L2+ managed industrial PoE switch

Features of the ONV-IPS56036PFM 10G uplink 36-port L2+ managed industrial PoE switch

(Call for Price +88 018-94683430)

  • Ports: 24× Gigabit PoE + 8× Gigabit SFP + 4× 10G SFP+
  • PoE Standard: IEEE 802.3af/at, up to 30W per port
  • Management: L2+ features, VLAN, QoS, ACL, IPv4/IPv6, static routing
  • Redundancy: STP/RSTP/MSTP, ERPS for fast recovery
  • Industrial Grade: Dual AC/DC power, fanless design, 1U rack mounting

Description

Specification of the 10G uplink 36-port L2+ managed industrial PoE switch

Model ONV-IPS56036PFM
ONV-IPS56036PFM-at
Interface Characteristics
Fixed Port Alarm switch port (FAULT)
2*AC100-240V input ports
1*Console RS232 port (115200, N, 8,1)
4*1/10G uplink SFP+ fiber ports (Data)
8*100/1000M SFP fiber combo ports (Data)
24*10/100/1000M RJ45 ports (Data/ Power)
2*DC48-57V input ports (support reverse polarity protection)
Ethernet Port Port 1-24 can support 10/100/1000Base-T(X) auto-sensing, full/ half duplex MDI/ MDI-X self-adaption
Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP (≤100 meters)
100BASE-TX: Cat5 or later UTP (≤100 meters)
1000BASE-T: Cat5e or later UTP (≤100 meters)
Optical Fiber Port 1/10G SFP+ optical fiber port, default no include optical module (optional single-mode/ multi-mode, single fiber/ dual fiber optical module. LC)
Optical Fiber Port Expansion Turbo overclocking 2.5G optical module expansion and ring network
Optical Cable/ Distance Multi-mode: 850nm/ 0-550m, 850nm/ 0-300m(10G), Single-mode: 1310nm/ 0-40km, 1550nm/ 0-120km.
Chip Parameter
Network Management Type L2+
Network Protocol IEEE 802.3 10BASE-T, IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-X, IEEE 802.3ae 10GBase-SR/LR, IEEE 802.3x
Forwarding Mode Store and Forward (Full wire speed)
Switching Capacity 128Gbps (non-blocking)
Forwarding Rate@64byte 95.23Mpps
CPU 800MHz
DRAM 1G
FLASH 128M
MAC 16K
Buffer Memory 12M
Jumbo Frame 12K
LED Indicator Power: PWR (Yellow), System: SYS (Yellow), Network: Link/Act (Yellow), PoE: PoE (Green), Fiber port: L/A (Green)
Reset Switch Yes, press and hold the switch for 10 seconds and release it to restore the factory settings
PoE& Power Supply
PoE Port Port 1-24
PoE Management PoE working status display, Port PoE on/off, af/at power distribution
Power Supply Pin 1/2 (+) 3/6(-)
Max Power Per Port 30W, IEEE 802.3 af/at
Total PWR/ Input Voltage 2*400W/ (AC100-240V)
2*600W/ (AC100-240V)
Power Consumption Standby<20W, Full Load<380W
Standby<22W, Full Load<600W
Power Supply Built-in power supply, AC100~240V 50-60Hz, 5.0A
Built-in power supply, AC100~240V 50-60Hz, 6.6A
Power Input Port Alarm switch port, 2*AC power input ports, 2*DC48-57V input ports
Dual input power port design: AC power supply priority to support anti-reverse connection protection, and automatically switches to DC connection when power fails.
Physical Parameter
Operation Temp/ Humidity -40~+75°C, 5%~90% RH Non condensing
Storage Temp/ Humidity -40~+85°C, 5%~95% RH Non condensing
Dimension (L*W*H) 440*378*44.5mm
Net /Gross Weight 5.5kg/ 6.3kg 6.3kg/ 7.1kg
Installation Desktop, 1U/19” cabinet
Certification& Warranty
Lightning Protection IEC61000-4-3 (RS):10V/m (80-1000MHz)
FCC Part 15/CISPR22 (EN55022): Class A
IEC61000-6-2 (Common Industrial Standard)
IEC61000-4-9 (Pulsed magnet field): 1000A/m
IEC61000-4-10 (Damped oscillation): 30A/m 1MHz
IEC61000-4-12/18 (Shockwave): CM2.5kV, DM1kV
Protection level: IP30, Lightning protection: 6KV 8/20us
IEC61000-4-4(EFT): Power cable: ±4kV, data cable: ±2kV
IEC61000-4-16 (Common-mode transmission): 30V, 300V, 1s
IEC61000-4-2 (ESD): ±8kV contact discharge, ±15kV air discharge
IEC61000-4-6 (Radio frequency transmission): 10V(150kHz~80MHz)
IEC61000-4-8 (Power frequency magnetic field): 100A/m, 1000A/m, 1s-3s
IEC61000-4-5 (Surge): Power cable: CM±4kV/ DM±2kV, data cable: ±4kV
Mechanical Properties IEC60068-2-6 (Anti Vibration), IEC60068-2-27 (Anti Shock), IEC60068-2-32 (Free Fall)
Certification CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class A, RoHS
Warranty 5 years, lifelong maintenance.
Network Management Feature
Interface Port real-time flow management (Flow Interval)
Broadcast storm suppression based on port rate
Optical port SFP module DDMI real-time digital diagnosis
Port EEE Green Ethernet Energy-Saving configuration and status view
IEEE 802.3x flow control (Full duplex), Port exception protection mechanism
Limit the rate of incoming and outgoing packet traffic, mini granularity is16Kbps and max is 1Gbps
L3 Feature ARP protocol max 1024 entries
Static route, RIPv1/v2, RIPng, OSPFv1/v2, OSPFv3
L2+ network management function, IPV4/ IPV6 dual-stack management
VLAN Port configuration of Access, Trunk, Hybrid, IEEE 802.1q
Voice VLAN, GVRP VLAN protocol, Port-based VLAN (4K)
Protocol-based VLAN, MAC address-based VLAN, QinQ configuration
Port Aggregation LACP dynamic aggregation, Static aggregation, Max 14 aggregation groups and max 8 ports per group.
Spanning Tree STP BPDU Guard, BPDU filtering and BPDU forwarding
STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
ERPS Ring Network ERPS, Recovery time less than 20ms, ITU-T G.8032
Multicast MLD Snooping, Multicast VLAN
User quick log out, MVR (Multicast VLAN Registration)
IGMP Snooping v1/v2/v3 and 1024 multicast groups at most
Mirroring Bidirectional traffic mirroring for basic ports
Supports 1-to-multiple mirroring, supports up to 4 port sessions
QoS Flow-based rate limiting, Flow-based redirection
Queue scheduling algorithm (SP, WRR, SP+WRR)
Flow-based packet filtering, 8*Output queues of each port
802.1p/ DSCP priority mapping, Diff-Serv QoS, Priority mark/ remark
ACL ACL distribution based on port and VLAN
L2-L4 packet filtering function, matching the first 80 bytes message, and provides ACL definitions based on source MAC address, destination MAC address, source IP address, destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, VLAN, etc.
Security Port based IEEE802.1X authentication
SSL guarantees data transmission security
Quad binding function of IP+MAC+VLAN+ports
MAC address learning limit, MAC address black hole
IP Source Guard function, AAA& RADIUS certification
Anti DoS attack, Port broadcast message suppression
Hierarchical user management and password protection
SSH 2.0 provides a secure encrypted channel for user login
Host data backup mechanism, ARP intrusion detection function
Port isolation, IP source address protection, ARP message speed limit function
DHCP DHCP Client, DHCP Snooping, DHCP Server
Management Link Layer Discovery Protocol (LLDP)
NTP clock, Web network management (https)
FTP, TFTP file upload and download management
Console/ Telnet/ CLI/ SSH command line configuration
ONV NMS platform cluster management (LLDP+SNMP)
One-click restore, Viewing CPU Instant Utilization Status
SNMP V1/V2/V3, Cable status check, Ping detection, System work log
System Web browser: Mozilla Firefox 2.5 or higher, Google Chrome V42 or higher, Cat5 and above Ethernet cable
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, Mac OS X) installed on each computer in the network Cat5 and above Ethernet cable

uplink 36-port L2+ managed industrial PoE switch

10G Uplink 36-port L2+ managed industrial PoE switch

The ONV-IPS56036PFM 10G uplink 36-port L2+ managed industrial PoE switch is an L2+ controlled industrial PoE switch with a large capacity that is intended for use in demanding enterprise and industrial network environments. This switch guarantees smooth data transfer, fast connectivity, and dependable power distribution with its 24 Gigabit PoE ports, 8 extra Gigabit RJ45 ports, and 4 10G SFP+ uplink ports. It is the best option for mission-critical networking applications, industrial automation, and IP surveillance. With a switching capacity of 176 Gbps and a forwarding rate of 130.994 Mpps, the ONV-IPS56036PFM, designed for high-performance networking, guarantees seamless data flow even in expansive networks.

 

The four 10G SFP+ uplink connectors make ultra-fast fiber connectivity possible, which facilitates seamless integration with data centers and backbone networks. With a maximum PoE output of 30W per port and a maximum power budget of 600W, the switch supports IEEE 802.3af/at PoE standards. This simplifies deployment and lowers infrastructure costs by enabling it to power VoIP phones, IP cameras, wireless access points, and other PoE-enabled devices without the need for separate power sources. The ONV-IPS56036PFM is made for tough industrial settings and can function in a broad temperature range of -40°C to 75°C. Its fanless design and sturdy metal casing guarantee longevity, improved heat dissipation, and silent operation. It is ideal for outdoor and industrial settings since it offers additional protection against power fluctuations through surge and ESD protection.

 

 

 

Overall, the ONV-IPS56036PFM 10G uplink 36-port L2+ managed industrial PoE switch provides the ideal balance of power, performance, and security, whether you’re in charge of a high-speed enterprise setup, an industrial automation network, or a large-scale surveillance system.

 

What is the price of the 10G uplink 36-port L2+ managed industrial PoE switch
in Bangladesh?

The latest price of the ONV-IPS56036PFM-at is (Call for Price +88 018-94683430). You can buy the ONV-IPS56036PFM from us at the best price. You can either purchase it through our website or directly visit our office.

Our Office Address: 51, Kazi Villa, 3rd Floor, Suvastu Arcade ICT Bhaban Goli, New Elephant Road, Dhaka-1205, Bangladesh.

Contact Us: +88 01894-683430

Reviews

There are no reviews yet.

Be the first to review “10G uplink 36-port L2+ managed industrial PoE switch”

Related products