ONV-IPS36048PFM 10G uplink 52-port L2+ managed industrial PoE switch
Featues of the ONV-IPS36048PFM 10G uplink 52-port L2+ managed industrial PoE switch
(Call for Price +88 018-94683430)
- Ports: 48× Gigabit PoE + 4× 10G SFP+
- PoE Standard: IEEE 802.3af/at, up to 30W per port
- Management: L2+ features, VLAN, QoS, ACL, static routing
- Redundancy: STP/RSTP/MSTP, ERPS for fast recovery
- Industrial Grade: IP30, fanless, 1U rack mounting
Description
Specificaiton of the ONV-IPS36048PFM 10G uplink 52-port L2+ managed industrial PoE switch
| Model | ONV-IPS36048PFM |
| Interface Characteristics | |
| Fixed Port |
2*AC100-240V input ports
1*Console RS232 port (115200, N, 8,1) 4*1/10G uplink SFP+ fiber ports (Data) 48*10/100/1000Base-T PoE ports (Data/Power) 2*DC48-57V input ports (support reverse polarity protection) |
| Ethernet Port |
Port 1-48 can support 10/100/1000Base-T auto-sensing, full/ half duplex MDI/ MDI-X self-adaption
|
| SFP Slot Port |
10BASE-T: Cat3,4,5 UTP (≤100 meters)
100BASE-TX: Cat5 or later UTP (≤100 meters) 1000BASE-T: Cat5e or later UTP (≤100 meters) |
| Twisted Pair Transmission |
1/10G SFP+ optical fiber port, default no include optical module (optional single-mode/ multi-mode, single fiber/ dual fiber optical module. LC)
|
| Optical Cable |
Multi-mode: 850nm/ 0~550m (1.25G), 850nm/ 0~300m(10G), Single-mode: 1310nm/ 0-40km, 1550nm/ 0-120km.
|
| Chip Parameter | |
| Network Management Type | L2+ |
| Network Protocol |
IEEE 802.3 10BASE-T, IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-X, IEEE 802.3ae 10GBase-SR/LR, IEEE 802.3x
|
| Forwarding Mode |
Store and Forward (Full wire speed)
|
| Switching Capacity |
176Gbps (non-blocking)
|
| Forwarding Rate@64byte | 131Mpps |
| CPU | 500MHz |
| DRAM | 4G |
| FLASH | 256M |
| MAC | 32K |
| Buffer Memory | 32M |
| Jumbo Frame | 9.6K |
| LED Indicator |
Power: PWR(Yellow), System: SYS(Green), Network: Link/Act (Yellow), PoE: PoE (Green), Fiber port: L/A (Green)
|
| Reset Switch | Yes |
| PoE& Power Supply | |
| PoE Port | Port 1 to 48 |
| PoE Management |
PoE power supply total power limit configuration
Power delay start, PoE work and time scheduling Port PoE working status display, Port PoE output priority configuration Port PoE output power distribution, PoE on/off, af/at power distribution |
| Power Supply Pin | 1/2(+) 3/6 (-) |
| Max Power Per Port |
30W, IEEE 802.3 af/at
|
| Power Consumption |
Standby<35W, Full load<600W
|
| Power Supply |
Built-in power supply, AC100~240V 50-60Hz, 6.6A
|
| Power Input Port |
Alarm switch port, 2*AC power input ports, 2*DC48-57V input ports
Dual input power port design: AC power supply priority to support anti-reverse connection protection, and automatically switches to DC connection when power fails. |
| Physical Parameter | |
| Operation Temp/ Humidity |
-40~+80°C, 5%~90% RH non condensing
|
| Storage Temp/ Humidity |
-40~+85°C, 5%~95% RH non condensing
|
| Dimension (L*W*H) |
440*378*44.5mm
|
| Net /Gross Weight |
6.75kg/ 7.55kg
|
| Installation |
Desktop, 1U/19” cabinet
|
| Certification& Warranty | |
| Lightning Protection |
IEC61000-4-3 (RS):10V/m (80-1000MHz)
FCC Part 15/CISPR22 (EN55022): Class A IEC61000-6-2 (Common Industrial Standard) IEC61000-4-9 (Pulsed magnet field): 1000A/m IEC61000-4-10 (Damped oscillation): 30A/m 1MHz IEC61000-4-12/18 (Shockwave): CM2.5kV, DM1kV Protection level: IP30, Lightning protection: 6KV 8/20us IEC61000-4-4(EFT): Power cable: ±4kV, data cable: ±2kV IEC61000-4-16 (Common-mode transmission): 30V, 300V, 1s IEC61000-4-2 (ESD): ±8kV contact discharge, ±15kV air discharge IEC61000-4-6 (Radio frequency transmission): 10V(150kHz~80MHz) IEC61000-4-8 (Power frequency magnetic field): 100A/m, 1000A/m, 1s-3s IEC61000-4-5 (Surge): Power cable: CM±4kV/ DM±2kV, data cable: ±4kV |
| Mechanical Properties |
IEC60068-2-6 (Anti Vibration), IEC60068-2-27 (Anti Shock), IEC60068-2-32 (Free Fall)
|
| Certification |
CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class A, RoHS
|
| Warranty |
5 years, lifelong maintenance.
|
| Network Management Feature | |
| Interface |
Port green Ethernet Energy-saving setting
Broadcast storm control based on port speed Port temperature protection setting, IEEE 802.3x flow control (Full duplex) The speed limit of the message flow in the access port, mini particle size is 64Kbps. |
| L3 Feature |
ARP protocol max 1024 entries
Static routing/ default routing, max 128 entries L2+ network management, IPV4/IPV6 dual stack management L3 routing and forwarding and communication between different network segments and different VLAN |
| VLAN |
Access, Trunk, and Hybrid Port Configurations
Port-based VLAN (4K), IEEE802.1q, QinQ configuration Voice VLAN, Protocol-based VLAN, MAC address-based VLAN |
| Port Aggregation |
LACP, Static aggregation, Max 26 aggregation groups and 8 ports per group.
|
| Spanning Tree |
STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
|
| Ring Network Protocol |
G.8032 (ERPS), Recovery time less than 20ms. 255 Ring at most, Max 254 devices per ring.
|
| Multicast |
MLD Snooping, Multicast VLAN, IGMP Snooping v1/v2/v3, Max 1024 multicast groups, Fast log out
|
| Port Mirroring |
Bidirectional data mirroring based on port
|
| QoS |
Flow-based Rate Limiting, Flow-based redirection
Queue Scheduling Algorithm (SP, WRR, SP+WRR) Flow-based Packet Filtering, 8* output queues of each port 802.1p/ DSCP priority mapping, Diff-Serv QoS, Priority Mark/ Remark |
| ACL |
ACL distribution based on port and VLAN
L2-L4 packet filtering function, matching the first 80 bytes message, and provides ACL definitions based on source MAC address, destination MAC address, source IP address, destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, VLAN, etc. |
| Security |
Mac black holes, IP source protection
IEEE802.1X & MAC address authentication Broadcast storm control, Backup for host datum SSH 2.0, SSL, Port isolation, ARP message speed limit User hierarchical management and password protection Anti-DoS attack, AAA & RADIUS & TACACS+ certification IP-MAC-VLAN-Port binding, ARP inspection, MAC learning limit |
| DHCP |
DHCP Client, DHCP Snooping, DHCP Server, DHCP Relay
|
| Management |
NTP clock, One click restore, SNMP V1/V2/V3
System work log, Web network management (https) Ping detection, Link Layer Discovery Protocol (LLDP) ONV-NMS platform cluster management (LLDP+SNMP) Cable status check, viewing CPU Instant Utilization Status Console/ AUX Modem/ Telnet/ CLI command line configuration FTP, TFTP, Xmodem, SFTP file upload and download management |
| System |
Web browser: Mozilla Firefox 2.5 or higher, Google Chrome V42 or higher, Cat5 and above Ethernet cable
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, Mac OS X) installed on each computer in the network Cat5 and above Ethernet cable |
ONV-IPS36048PFM 10G uplink 52-port L2+ managed industrial PoE switch
The ONV-IPS36048PFM 10G uplink 52-port L2+ managed industrial PoE switch is a Layer 2+ managed industrial PoE switch made to effectively and dependably manage high-bandwidth network needs. With its 48 Gigabit PoE ports and 4 10G SFP+ uplink ports, this switch is perfect for applications that need intelligent network management, a strong power supply, and fast data transfer. This switch offers performance, security, and scalability for IP surveillance, industrial automation, or enterprise networking. With a forwarding rate of 160.714 Mpps and a switching capacity of 216 Gbps, the ONV-IPS36048PFM guarantees lag-free, seamless data transfer. Ultra-fast fiber connectivity is provided by the four 10G SFP+ uplink ports, which eases congestion and permits smooth long-distance communication across business networks or industrial configurations. With a total PoE power budget of 800W (expandable to 1000W), this switch supports IEEE 802.3af/at (PoE/PoE+) standards and effectively powers a variety of IP cameras, wireless access points, VoIP phones, and other PoE-enabled devices. By delivering up to 30W per PoE port, separate power supplies are no longer necessary, which lowers installation expenses.
Overall, the ONV-IPS36048PFM 10G uplink 52-port L2+ managed industrial PoE switch is designed to provide performance, security, and scalability, whether you require a powerful PoE switch for enterprise applications, a high-capacity switch for extensive surveillance, or a dependable industrial networking solution.
What is the price of the 10G uplink 36-port L2+ managed industrial PoE switch
in Bangladesh?
The latest price of the ONV-IPS36048PFM is (Call for Price +88 018-94683430). You can buy the ONV-IPS36048PFM from us at the best price. You can either purchase it through our website or directly visit our office.
Our Office Address: 51, Kazi Villa, 3rd Floor, Suvastu Arcade ICT Bhaban Goli, New Elephant Road, Dhaka-1205, Bangladesh.
Contact Us: +88 01894-683430
Related products
-
Netgear GS308 8 Port Desktop Switch Gigabit Ethernet Unmanaged
Buy Now -
Sale!
Hikvision DS-3E0105P-E-M 4 Port Fast Ethernet POE Switch
Original price was: ৳ 3,400.00.৳ 2,850.00Current price is: ৳ 2,850.00. Buy Now -
Sale!
ONV-H1108PGL 10-Port PoE Switch Gigabit Uplink 10M/250m Transmission
Original price was: ৳ 8,000.00.৳ 5,000.00Current price is: ৳ 5,000.00. Buy Now -
Sale!
Dahua PFS4218-16GT-240 16-Port PoE Gigabit Managed Switch
Original price was: ৳ 32,000.00.৳ 29,200.00Current price is: ৳ 29,200.00. Buy Now
Reviews
There are no reviews yet.