প্রযুক্তি পণ্যের বাজার অস্থিতিশীল হওয়ার কারণে যেকোন সময় মূল্য পরিবর্তন হতে পারে। তাই  , অর্ডার করার পূর্বে কাস্টমার কেয়ার থেকে পন্যের মূল্য , স্টক ও ডেলিভারি সম্পর্কে জানতে এই নাম্বারে ফোন করুন = 01894-683430
ONV-IPS38048PFM 10G uplink 52-port L3 managed industrial PoE switch

ONV-IPS38048PFM 10G uplink 52-port L3 managed industrial PoE switch

Features of the ONV-IPS38048PFM 10G uplink 52-port L3 managed industrial PoE switch

(Call for Price +88 018-94683430)

  • Model: ONV-IPS38048PFM
  • Ports: 48× Gigabit PoE + 4× 10G SFP+
  • PoE: IEEE 802.3af/at, up to 30W per port
  • Layer 3: IPv4/IPv6, dynamic routing, ACL/QoS, VLAN
  • Design: Galvanized steel housing, dual AC/DC power, rack mountable

Description

Specification of the ONV-IPS38048PFM 10G uplink 52-port L3 managed industrial PoE switch

Model ONV-IPS38048PFM
Interface Characteristics
Fixed Port
2*AC100-240V input ports
1*Console port (115200, N, 8,1)
4*1/10G uplink SFP+ fiber ports (Data)
48*10/100/1000Base-T PoE ports (Data/Power)
2*DC48-57V input ports (support reverse polarity protection)
Ethernet Port
Port 1-48 can support 10/100/1000Base-T auto-sensing, full/ half duplex MDI/ MDI-X self-adaption
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP (≤100 meters)
100BASE-TX: Cat5 or later UTP (≤100 meters)
1000BASE-T: Cat5e or later UTP (≤100 meters)
Optical Fiber Port
1/10G SFP+ optical fiber port, default no include optical module (optional single-mode/ multi-mode, single fiber/ dual fiber optical module. LC)
Optical Cable/ Distance
Multi-mode: 850nm/ 0-550m, 850nm/ 0-300m(10G), Single-mode: 1310nm/ 0-40km, 1550nm/ 0-120km
Chip Parameter
Network Management Type L3
Network Protocol
IEEE 802.3 10BASE-T, IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-X, IEEE 802.3ae 10GBase-SR/LR, IEEE 802.3x
Forwarding Mode
Store and Forward (Full Wire Speed)
Switching Capacity
176Gbps (non-blocking)
Forwarding Rate@64byte 131Mpps
CPU 500MHz
DRAM 4G
FLASH 256M
MAC 32K
Buffer Memory 32M
Jumbo Frame 9.6K
LED Indicator
Power: PWR(Yellow), System: SYS(Green), Network: Link/Act (Yellow), PoE: PoE (Green), Fiber port: L/A (Green)
Reset Switch
Yes, press and hold the switch for 10 seconds and release it to restore the factory settings
PoE& Power Supply
PoE Port Port 1-48
PoE Management
PoE power supply total power limit configuration
Power delay start, PoE work and time scheduling
Port PoE working status display, Port PoE output priority configuration
Port PoE output power distribution, PoE on/off, af/at power distribution
Power Supply Pin 1/2(+) 3/6 (-)
Max Power Per Port
30W, IEEE 802.3 af/at
Power Consumption
Standby<35W, Full load<600W
Power Supply
Built-in power supply, AC100~240V 50-60Hz, 6.6A
Power Input Port
Alarm switch port, 2*AC power input ports, 2*DC48-57V input ports
Dual input power port design: AC power supply priority to support anti-reverse connection protection, and automatically switches to DC connection when power fails.
Physical Parameter
Operation Temp/ Humidity
-40~+80°C, 5%~90% RH Non condensing
Storage Temp/ Humidity
-40~+85°C, 5%~95% RH Non condensing
Dimension (L*W*H)
440*378*44.5mm
Net /Gross Weight
6.75kg/ 7.55kg
Installation
Desktop, 1U/19’’ cabinet
Certification& Warranty
Lightning Protection
IEC61000-4-3(RS):10V/m (80~1000MHz)
FCC Part 15/CISPR22 (EN55022): Class A
IEC61000-6-2 (Common Industrial Standard)
IEC61000-4-9 (Pulsed magnet field): 1000A/m
IEC61000-4-10 (Damped oscillation): 30A/m, 1MHz
IEC61000-4-12/18 (Shockwave): CM 2.5kV, DM 1kV
Protection level: IP30, Lightning protection: 6KV 8/20us
IEC61000-4-4(EFT): Power cable:±4kV, Data cable: ±2kV
IEC61000-4-16 (Common-mode transmission): 30V, 300V, 1s
IEC61000-4-2 (ESD): ±8kV contact discharge, ±15kV air discharge
IEC61000-4-6 (Radio frequency transmission): 10V(150kHz~80MHz)
IEC61000-4-8 (Power frequency magnetic field):100A/m,1000A/m,1-3s
IEC61000-4-5( Surge): Power cable: CM±4kV/DM±2kV, Data cable: ±4kV
Mechanical Properties
IEC60068-2-6 (Anti Vibration), IEC60068-2-32 (Free Fall), IEC60068-2-27 (Anti Shock)
Certification
CCC, CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class A, RoHS
Warranty
5 years, lifelong maintenance.
Network Management Feature
Interface
No connection port automatic sleep
Port green Ethernet Energy-saving setting
Broadcast storm control based on port speed
SFP+ optical port DDMI real-time digital diagnosis
Port temperature protection setting, IEEE 802.3x flow control (Full-duplex)
The speed limit of the message flow in the access port, mini particle size is 64Kbps.
L3 Routing
IPV4 Equal Cost Routing
NG protocol max 1000 entries
ARP protocol max 1000 entries
IPV4/IPV6 VRRP max group is 255
Pingv6, Telnetv6, TFTPv6, DNSv6, ICMPv6
IPV4/IPV6 VLANIF interface supports up to 128
IPV4/IPV6 static route/ default route supports up to 128 entries
L3 network management function, IPV4/IPV6 dual-stack management
IPV4 dynamic routing, RIPv1/v2, OSPFv2, BGP4+, 4000 routing entries
IPV6 dynamic routing OSPFv3, BGP+, RIPng, IPV6 management, 1000 routing entries
L3 routing and forwarding, support communication between different network segments and different VLAN
VLAN
Voice VLAN, QinQ configuration, IEEE802.1q
VLAN based on MAC, VLAN based on the protocol
4K VLAN based on port, Port configuration of Access, Trunk, Hybrid.
Port Aggregation
LACP, Static aggregation, Max 26 aggregation groups and 8 ports per group.
Spanning Tree
STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
Ring Network Protocol
G.8032 (ERPS), Recovery time less than 20ms. 250 Ring at most, Max 250 devices per ring.
Multicast
MLD Snooping, Multicast VLAN, Fast log out, IGMP Snooping v1/v2, Max 1024 multicast groups
Port Mirroring
Bidirectional data mirroring based on port
QoS
Flow-based redirection, Flow-based rate limiting
Flow-based packet filtering, Priority Mark/Remark
8*Output queues of each port, 802.1p/ DSCP priority mapping
Queue Scheduling Algorithm (SP, WRR, SP+WRR), Diff-Serv QoS
ACL
Port-based Issuing ACL, ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
Security
ARP message rate limiting function
Port broadcast message suppression
SSL ensures data transmission security
AAA& RADIUS& TACACS+ certification
Limit the number of MAC addresses learned
Port isolation, Host data backup mechanism
Anti-DoS attack, ARP intrusion detection function
Quadruple binding function of IP+MAC+VLAN+port
IP source address protection, MAC address black hole
User hierarchical management and password protection
SSH 2.0 provides a secure encrypted channel for user login
IEEE802.1X authentication/ centralized MAC address authentication
DHCP
DHCP Client, DHCP Snooping, DHCP Server, DHCP Relay
Management
System work log, Link Layer Discovery Protocol
NTP clock, Cable length detection, SNMP V1/V2/V3
Ping detection, Web network management (HTTPS)
ONV-NMS platform cluster management (LLDP+SNMP)
One click recovery, View CPU real-time utilization status
FTP, TFTP, Xmodem, SFTP file upload and download management
Console/ AUX Modem/ Telnet/ SSH2.0 CLI command line configuration
System
Web browser: Mozilla Firefox 2.5 or higher, Google Chrome V42 or higher, Cat5 and above Ethernet cable
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, Mac OS X) installed on each computer in the network Cat5 and above Ethernet cable

ONV-IPS38048PFM 10G uplink 52-port L3 managed industrial PoE switch

ONV-IPS38048PFM 10G uplink 52-port L3 managed industrial PoE switch

The ONV-IPS38048PFM 10G uplink 52-port L3 managed industrial PoE switch is a potent Layer 3 managed industrial PoE switch made for enterprise infrastructures, high-bandwidth surveillance systems, industrial automation, and huge networks. With four 10G SFP+ uplinks and 48 gigabit PoE ports, this switch offers lightning-fast connectivity, smart traffic control, and top-notch security features to guarantee a reliable and effective network. The ONV-IPS38048PFM is perfect for smart cities, data centers, and mission-critical network applications because of its robust metal housing, broad working temperature range, and sophisticated power protection systems, all of which were designed for tough industrial conditions.

 

Zero-latency network performance is ensured with 640 Gbps switching capacity and 476 Mpps forwarding rate, even for bandwidth-intensive applications like VoIP calls, industrial automation, and video streaming. Fast and continuous data transfer is ensured by the smooth connectivity that 4× 10G SFP+ uplink ports offer between network cores, distant locations, and data centers. The 64K MAC address table is perfect for enterprise and industrial networking systems since it allows for extensive network growth. These features enable the ONV-IPS38048PFM to manage high network traffic volumes while preserving remarkable performance and stability.

 

 

Overall, the ONV-IPS38048PFM 10G uplink 52-port L3 managed industrial PoE switch is a high-performance, feature-rich industrial PoE switch designed to provide dependable, secure, and scalable networking solutions. This switch guarantees excellent performance, smooth communication, and long-term dependability, whether you’re extending a surveillance network, installing an industrial automation system, or upgrading an organizational infrastructure.

 

What is the price of the ONV-IPS38048PFM 10G uplink 52-port L3 managed industrial PoE switch in Bangladesh?

The latest price of the ONV-IPS38048PFM 10G uplink 52-port L3 managed industrial PoE switch is (Call for Price +88 018-94683430). You can buy the ONV-IPS38048PFM 10G uplink 52-port L3 managed industrial PoE switch from us at the best price. You can either purchase it through our website or directly visit our office.

Our Office Address: 51, Kazi Villa, 3rd Floor, Suvastu Arcade ICT Bhaban Goli, New Elephant Road, Dhaka-1205, Bangladesh.

Contact Us: +88 01894-683430

Reviews

There are no reviews yet.

Be the first to review “ONV-IPS38048PFM 10G uplink 52-port L3 managed industrial PoE switch”

Related products